Single spring, rubber diaphragm seal with boot mounted seat as standard. Available for metric and imperial shaft sizes (metric shown), a widely specified and utilised seal type, capable of long service life. Alternative version with longer working length available

Single spring, rubber diaphragm seal with boot mounted seat as standard. Available for metric and imperial shaft sizes (metric shown), a widely specified and utilised seal type, capable of long service life. Alternative version with longer working length available

Single spring, rubber diaphragm seal with boot mounted seat as standard. Available for metric and imperial shaft sizes (metric shown), a widely specified and utilised seal type, capable of long service life. Alternative version with longer working length available

Single spring, rubber diaphragm seal with boot mounted seat as standard. Available for metric and imperial shaft sizes (metric shown), a widely specified and utilised seal type, capable of long service life. Alternative version with longer working length available

Vulcan have been successfully supplying the dairy and beverage industries with seals to suit APV Puma® pumps for over 15 years. Vulcan produce and stock all the seals and associated components commonly used on the 1.000" and 1.500" shaft Puma® pumps.

A range of highly proficient, widely utilised, O-Ring mounted, conical spring seals with solid, stainless steel head and carbon seat. Suitable for a wide variety of duties, and to suit common standard and DIN housing dimensions.

O-Ring mounted, conical spring seal with pressed stainless seal head retainer and pressed carbon seat to suit common standard and DIN housings. Highly productionised seal capable of wide ranging service. Seal and seat faces can be inter-changed with each other and can be easily replaced.

O-Ring mounted, with pressed seal head and seat, plus conical spring, designed to fit DIN 24960 (EN12756) housings. Cost-effective seal suitable for many duties with the option to replace wear faces and 'O'-Rings during over-hauls.

A range of highly proficient, widely utilised, O-Ring mounted, conical spring seals with solid, stainless steel head and carbon seat. Available to suit DIN 24960 (EN12756) housings. Suitable for a wide variety of general and medium duties.

Compact single spring, rubber diaphragm seal specifically designed to comply with DIN 24960 (EN12756) housings.Shown with boot mounted seat, but is also often specified with a Type 24 'O'-Ring mounted DIN Long or Short seat (Types 24L or 24S respectively)

Compact single spring, rubber diaphragm seal specifically designed to comply with DIN 24960 (EN12756) housings.Shown with boot mounted seat, but is also often specified with a Type 24 'O'-Ring mounted DIN Long or Short seat (Types 24L or 24S respectively)

Sleeve mounted, rubber bellows seal, with dimensions to equate to the common American seal standard. Mass produced and easily fitted for low pressure, general applications on small shaft diameters.

Coolant pump seal primarily utilised in combustion engine water pumps, with dimensions to equate to the common American seal standard.

Metric and imperial single spring, rubber diaphragm shaft seal (Imperial shown), designed for different sized seat housings and seal working lengths to the Types 10 + 20. Imperial sizes are most commonly found on American equipment. Alternative version with longer working length available.

Metric and imperial single spring, rubber diaphragm shaft seal (Imperial shown), designed for different sized seat housings and seal working lengths to the Types 10 + 20. Imperial sizes are most commonly found on American equipment. Alternative version with longer working length available.