N-B01 <=> Type 18
	Compact, enclosed rubber bellows seal with a wide stationary seat. Very short working length makes the Type 18 ideal for equipment where space for a seal is restricted. Seal is supplied with a top hat retainer (remove upon installation)

	N-B012 <=> Type 192
	A robust rubber bellows seal, with a wide NON-DIN cross section, for optimum flexibility and durability. Also available with extended bellows to meet DIN L1K and L1N working lengths. Supplied as standard with a non DIN seat, with a wide range of alternative ‘O’-ring and boot mounted seats available.

	N-B013 <=> Type 193
	A robust rubber bellows seal, with a wide NON-DIN cross section, for optimum flexibility and durability. Also available with extended bellows to meet DIN L1K and L1N working lengths. Supplied as standard with a non DIN seat, with a wide range of alternative ‘O’-ring and boot mounted seats available.

	N-B02 <=> Type 19
	A robust rubber bellows seal, with a wide NON-DIN cross section, for optimum flexibility and durability. Also available with extended bellows to meet DIN L1K and L1N working lengths. Supplied as standard with a non DIN seat, with a wide range of alternative ‘O’-ring and boot mounted seats available.

	N-B03 <=> Type 70
	Coolant pump seal primarily utilised in combustion engine water pumps. The clearance of the seal and seat above the shaft allows one size to be used on several shaft diameters. Type 75 has dimensions to equate to the common American seal standard.Pricing shown is for materials highlighted below;

	N-B03U <=> Type 75
	Coolant pump seal primarily utilised in combustion engine water pumps, with dimensions to equate to the common American seal standard.

	N-B04 <=> Type 60
	Sleeve mounted, rubber bellows seal, Type 65 with dimensions to equate to the common American seal standard. Mass produced and easily fitted for low pressure, general applications on small shaft diameters.

	N-B04U <=> Type 65
	Sleeve mounted, rubber bellows seal, with dimensions to equate to the common American seal standard. Mass produced and easily fitted for low pressure, general applications on small shaft diameters.

	N-B05 <=> Type 14
	Universal compact DIN seal and seat available with different DIN standard working lengths. This robust, heavy duty bellows design provides excellent flexibility and durability. The seal is supplied as standard with a boot mounted seat, however alternate O-ring mounted seats are available.

	N-B052 <=> Type 142
	Universal compact DIN seal and seat available with different DIN standard working lengths. This robust, heavy duty bellows design provides excellent flexibility and durability. The seal is supplied as standard with a boot mounted seat, however alternate O-ring mounted seats are available.

	N-B053 <=> Type 143
	Universal compact DIN seal and seat available with different DIN standard working lengths. This robust, heavy duty bellows design provides excellent flexibility and durability. The seal is supplied as standard with a boot mounted seat, however alternate O-ring mounted seats are available.

	N-B07 <=> Type 1724
	High performance, wide duty, full convolution rubber bellows seal inside a stainless steel housing. Type 1724 features a non-clogging spring and self alignment capability, and is offered with a choice of Type 24 boot mounted (shown) or ‘O’-Ring Short or Long DIN seats

	N-BP02 <=> Type 1520 Imperial
	Imperial DIN profile seals and seat with working lengths to suit a common International standard (Metric dimensions shown). Seal has same working length and the same seat as our Type 20, and is suitable for general duties.

	N-BP02 <=> Type 1520 Metric
	Metric DIN profile seals and seat with working lengths to suit a common International standard (Metric dimensions shown). Seal has same working length and the same seat as our Type 20, and is suitable for general duties.

	N-BP04 <=> Type 1511
	DIN profile seal and a standard seat, with a choice of working lengths to suit common American standards. Seal has same working length and the same seat as our Type 11 or Type 22, but can provide improved sealing performance.

	N-BP05 <=> Type 1522
	DIN profile seal and a standard seat, with a choice of working lengths to suit common American standards. Seal has same working length and the same seat as our Type 11 or Type 22, but can provide improved sealing performance.

	N-M01 <=> Type 1609
	Multiple Spring seal with a highly effective design, commonly used in chemical and petrol-chemical duties. These seals are supplied with the Type 25 seat (shown). Standard Type 1609 incorporates a PTFE Wedge secondary seal or alternatively can be supplied with an ‘O’-Ring (See 1645S for design).

	N-M01S <=> Type 1609S
	Multiple Spring seal with a highly effective design, commonly used in chemical and petrol-chemical duties. These seals are supplied with the Type 25 seat (shown). Standard Type 1609 incorporates a PTFE Wedge secondary seal or alternatively can be supplied with an ‘O’-Ring (See 1645S for design).

	N-M02 <=> Type 1609B
	Multiple Spring, stepped shaft, balanced seal, alternative to the Type 1609/1609S. Standard Type 1609B utilises a PTFE wedge seal, or specify Type 1609BS for the 'O'-Ring version. Commonly fitted with the next shaft size down Type 25 seat.

	N-M02S <=> Type 1609BS
	Multiple Spring, stepped shaft, balanced seal, alternative to the Type 1609/1609S. Standard Type 1609B utilises a PTFE wedge seal, or specify Type 1609BS for the 'O'-Ring version. Commonly fitted with the next shaft size down Type 25 seat.

	N-M03 <=> Type 1659
	Narrow profile, multiple spring seal with a highly efficient design, frequently specified in chemical process industry pumps. Use Type 1659 with a PTFE Wedge or Type 1659S for 'O'-Ring variant. Commonly fitted with Vulcan Type 24 DIN Long or Type 24 DIN Short Stats.

	N-M03S <=> Type 1659S
	Narrow profile, multiple spring seal with a highly efficient design, frequently specified in chemical process industry pumps. Use Type 1659 with a PTFE Wedge or Type 1659S for 'O'-Ring variant. Commonly fitted with Vulcan Type 24 DIN Long or Type 24 DIN Short Stats.

	N-M04 <=> Type 1659B
	Multiple-Spring, stepped shaft, balanced seal with a highly efficient design. Standard Type 1659B incorporates a PTFE Wedge shaft seal, or specify Type 1659BS for the Balanced ‘O’-Ring version. Supplied with a suitable smaller shaft size Type 24 DIN Long (as shown).

	N-M04S <=> Type 1659BS
	Multiple-Spring, stepped shaft, balanced seal with a highly efficient design. Standard Type 1659B incorporates a PTFE Wedge shaft seal, or specify Type 1659BS for the Balanced ‘O’-Ring version. Supplied with a suitable smaller shaft size Type 24 DIN Long (as shown).

	N-M05 <=> Type 1645
	Narrow profile, multiple-spring seal, designed for common American installation dimensions, in chemical process industry equipment. Complies with ANSI B73-1974 centrifugal pump standard. Standard Type 1645 utilises a PTFE Wedge secondary seal and Type 1645S uses an ‘O’-Ring. Supplied with a Type 25 ‘V’ seat. (as shown)

	N-M05S <=> Type 1645S
	Multiple-Spring, stepped shaft, balanced seal to common American Installation dimensions. Standard Type 1645B incorporates a PTFE Wedge secondary seal with Type 1645BS being the 'O'-Ring variant. Commonly fitted with the next shaft size down Type 25 seat.

	N-M06 <=> Type 1645B
	Multiple-Spring, stepped shaft, balanced seal to common American Installation dimensions. Standard Type 1645B incorporates a PTFE Wedge secondary seal with Type 1645BS being the 'O'-Ring variant. Commonly fitted with the next shaft size down Type 25 seat.

	N-M06S <=> Type 1645BS
	Multiple-Spring, stepped shaft, balanced seal to common American Installation dimensions. Standard Type 1645B incorporates a PTFE Wedge secondary seal with Type 1645BS being the 'O'-Ring variant. Commonly fitted with the next shaft size down Type 25 seat.

	N-M07 <=> Type 50
	A unique design of multi-spring seal, where the sprung component behaves as the stationary. Suits all Inoxpa Prolac® applications where the single, uncooled mechanical seal is required. This seal is also utilised as the internal seal in double, cooled seal arrangements.

	N-P01 <=> Type 10 Metric
	Single spring, rubber diaphragm seal with boot mounted seat as standard. Available for metric and imperial shaft sizes (metric shown), a widely specified and utilised seal type, capable of long service life. Alternative version with longer working length available

	N-P01 <=> Type 10 Imperial
	Single spring, rubber diaphragm seal with boot mounted seat as standard. Available for metric and imperial shaft sizes (metric shown), a widely specified and utilised seal type, capable of long service life. Alternative version with longer working length available

	N-P01U <=> Type A1
	Robust, long working length, highly accommodating and reliable, rubber diaphragm balanced seal, which provides enhanced seal capability, performance and life. Improved design features enhance this popular seal. Suitable for common UK and Euro housing dimensions.

	N-P02 <=> Type 20 Metric
	Single spring, rubber diaphragm seal with boot mounted seat as standard. Available for metric and imperial shaft sizes (metric shown), a widely specified and utilised seal type, capable of long service life. Alternative version with longer working length available

	N-P02 <=> Type 20 Imperial
	Single spring, rubber diaphragm seal with boot mounted seat as standard. Available for metric and imperial shaft sizes (metric shown), a widely specified and utilised seal type, capable of long service life. Alternative version with longer working length available

	N-P02U <=> Type A2
	Metric and imperial, robust, short working length highly accommodating and reliable, rubber diaphragm balanced seal which provides enhanced seal capability, performance and life. Improved design features further enhance this popular seal. Suitable for common UK and Euro housing and working length dimensions, but also available to suit common US housing dimensions (Type A4)

	N-P03 <=> Type 24
	Compact single spring, rubber diaphragm seal specifically designed to comply with DIN 24960 (EN12756) housings.Shown with boot mounted seat, but is also often specified with a Type 24 'O'-Ring mounted DIN Long or Short seat (Types 24L or 24S respectively)

	N-P04 <=> Type 11
	Metric and imperial single spring, rubber diaphragm shaft seal (Imperial shown), designed for different sized seat housings and seal working lengths to the Types 10 + 20. Imperial sizes are most commonly found on American equipment. Alternative version with longer working length available.

	N-P04U <=> Type A4
	Robust, short working length highly accommodating and reliable rubber diaphragm balanced seal, which provides enhanced seal capability, performance and life. Improved design features further enhance this popular seal. Suitable for common US standard housing and working length dimensions.

	N-P05 <=> Type 22
	Metric and imperial single spring, rubber diaphragm shaft seal (Imperial shown), designed for different sized seat housings and seal working lengths to the Types 10 + 20. Imperial sizes are most commonly found on American equipment. Alternative version with longer working length available.

	N-P05U <=> Type A5
	Robust, short working length highly accommodating and reliable rubber diaphragm balanced seal, which provides enhanced seal capability, performance and life. Improved design features further enhance this popular seal. Suitable for common US standard housing and working length dimensions.

	N-P06 <=> Type 26
	Vulcan have been successfully supplying the dairy and beverage industries with seals to suit APV Puma® pumps for over 15 years. Vulcan produce and stock all the seals and associated components commonly used on the 1.000" and 1.500" shaft Puma® pumps.

	N-P08 <=> Type 95
	Metric and imperial, robust, general purpose, unbalanced pusher type seal capable of many shaft-sealing duties. The Type 95 drives directly from the shaft, and is also available with a short, non-pinned seat as Type 95N. Seal illustrated shows an inserted rotary face.

	N-P080 <=> Type 98
	Robust ,O-Ring mounted, unbalanced, metric shaft, parallel spring seal, as per Type 95, but with the addition of a double ‘O’-Ring mounted Stationary Seat and grub screwed drive collar. Most commonly found in marine and textile dyeing applications.

	N-P09 <=> Type 94
	Vulcan produce and stock a complete range of balanced seals to suit the Tuchenhagen® A and Z series pumos, seal types F1 to F5. Available with inserted carbon face seal heads, and inserted silicon carbide, or chrome dioxide coated stainless steel rotary counterfaces. E.P. 'O'-Rings are fitted as standard. If Nitrile or Viton® is required, please specify this at time of order.

	N-S02 <=> Type 8 Din Long
	DIN Long Type seats, with anti-rotation slot, are preferred for higher shaft size/speeds/pressures or sticky, co-agulating etc. Media.

	N-S03 <=> Type 8 Din Short
	Common O-Ring mounted DIN Short seat. DIN Short seats are normally only best recommended for smaller shaft sizes or for non-arduous duties.

	N-S04 <=> Type 24 Seat
	Vulcan offer a wide variety of stock Boot Mounted Seats, to suit a variety of different housings and working length standards, as well as different ring I.D.s to track against all Vulcan Seal faces. Boot Mounted Seats offer optimum cost and performance benefits and are widely utilised. Please specify your shaft size because each seat size shown has a unique I.D.

	N-S040 <=> Type 19B Seat
	Vulcan offer a wide variety of stock Boot Mounted Seats, to suit a variety of different housings and working length standards, as well as different ring I.D.s to track against all Vulcan Seal faces. Boot Mounted Seats offer optimum cost and performance benefits and are widely utilised. Please specify your shaft size because each seat size shown has a unique I.D.

	N-S05 <=> Type 24 Din Long
	O-Ring mounted stationary seat to DIN 24960 (EN12756) Standard with long tail and drive slot. The seat offers different axial dimensions to the Type 8 DIN long seat and can be utilised with most seals particularly the Type 24 and 1724 designs.

	N-S06 <=> Type 24 Din Short
	O-Ring mounted stationary seat to DIN 24960 (EN12756) Standard with short tail. The seat offers different axial dimensions to the Type 8 DIN short seat and can be utilised with most seals particularly the Type 24 and 1724 designs.

	N-S07 <=> Type 21 Seat
	O-Ring mounted H configuration stationary seat to suit standard European housing dimensions. These seats provide the benefit of being able to be pinned through-out the size range.

	N-S070 <=> Type 31 Seat
	O-Ring mounted H configuration stationary seat to suit standard American housing dimensions. These seats provide the benefit of being able to be pinned through-out the size range.

	N-S08 <=> Type 25 Seat
	The Type 25 seat is an industry standard stationary design with V-shape profile, supplied complete with 2 off PTFE gaskets. Commonly used with a wide variety of seals, particularly the multi-spring Type 16XX series.

	N-T01 <=> Type 8
	Conical spring, O-Ring mounted seal with a wide choice of elastomers and face materials. Suitable for a large variety of general duties and arduous duty applications, including those needing high pv value face combinations, and DIN Housing dimensions.

	N-T01.DIN <=> Type 8 DIN
	Conical spring, O-Ring mounted, DIN standard seal and DIN Long seat with drive slot. Suitable for a large variety of general and high duty applications through a ready choice of face material and elastomer materials.

	N-T02 <=> Type 8B
	Conical spring, O-Ring mounted seal and seat of similar design to the Type 8 but with a solid stainless seal head and 'O'-Ring mounted Carbon Seat. This standard face combination is suitable for general and medium duty applications.

	N-T03 <=> Type 12
	A range of highly proficient, widely utilised, O-Ring mounted, conical spring seals with solid, stainless steel head and carbon seat. Suitable for a wide variety of duties, and to suit common standard and DIN housing dimensions.

	N-T03.DIN <=> Type 12 DIN
	A range of highly proficient, widely utilised, O-Ring mounted, conical spring seals with solid, stainless steel head and carbon seat. Available to suit DIN 24960 (EN12756) housings. Suitable for a wide variety of general and medium duties.

	N-T04 <=> Type 13
	O-Ring mounted, conical spring seal with pressed stainless seal head retainer and pressed carbon seat to suit common standard and DIN housings. Highly productionised seal capable of wide ranging service. Seal and seat faces can be inter-changed with each other and can be easily replaced.

	N-T04.DIN <=> Type 13 DIN
	O-Ring mounted, with pressed seal head and seat, plus conical spring, designed to fit DIN 24960 (EN12756) housings. Cost-effective seal suitable for many duties with the option to replace wear faces and 'O'-Rings during over-hauls.

	N-W01 <=> Type 1688
	Wave spring mechanical seal with thin cross section and short working length. Most commonly used on rotary lobe pumps, found extensively in the food, process, dairy and brewery industries. Popular, common sizes are fitted with Vulcan’s Sinusoidal Split Wave-Springs.

	N-W02 <=> Type 1688L
	Rotary based wave sprung mechanical seal with thin cross section and short working length, supplied as standard with Vulcan Type 24 DIN Long seat. Most commonly used on rotary lobe pumps found extensively in the food, process, dairy and brewery industries. Popular, common sizes are fitted with Vulcan's Sinusoidal Split Wave-Springs.

	N-W03 <=> Type 1688W
	Vulcan manufacture seals to suit SR Series Pumps from S.S.P.® Vulcan Type 1688W seal and seat assemblies are designed to fit the most popular rotary lobe pumps, without any modification. The monolithic Tungsten Carbide or Stainless Steel seal head avoids face spinning problems, associated with competitor designs in common lobe pump duties.

	N-W04 <=> Type 1688Y
	Vulcan seals to suit Johnson® Positive Displacement Pumps Vulcan Type 1688Y seal and seat suit Johnson® positive displacement pumps, in all standard shaft sizes. Again the monolithic seal head provides seal capability, performance and increased life benefits.

	N-W07D <=> Type 1677
	Wave-spring ,O-Ring mounted seal commonly utilised in the European chemical process industries. Manufactured to suit DIN 24960 (EN12756) dimensions. Supplied as Type 1677M with a Monolithic face design for exceptional performance. Type 8 Din Long Seat shown is standard, with other variants available.