Welcome to Vulcan Seal Identification Suite
Water Pump Seals
PX28322
|
Water Pump Seals | |
 |
 |
5/8" Modified Vulcan Type 60 with boot seat to suit Purex Aquatron® P28322 models. |
| SPBASP20
|
Water Pump Seals | |
|
|
Compact enclosed rubber bellows seal with boot mounted seat to suit Badu® and Spec® pumps |
| SPCFD25
|
Water Pump Seals | |
 |
|
25mm Single-spring compact bellows seal to suit Certikin® FD models. |
| SPH1257
|
Water Pump Seals | |
|
|
3/4" Modified Vulcan Type 65 with O-ring seat to suit Sta-Rite® 5P4R models, seal part number U9372. |
| SPLH07
|
Water Pump Seals | |
 |
|
5/8" Modified Vulcan Type 70 with boot seat to suit Lee Howl® 4277 & 4278 models. |
| SPLH42
|
Water Pump Seals | |
|
|
3/4" Modified Vulcan Type 70 with boot seat to suit Lee Howl® 4270 3hp to 5.5hp models. |
| SPSR15
|
Water Pump Seals | |
 |
|
5/8" Modified Vulcan Type 65 with O-ring seat to suit Sta-Rite® 5P2R models, seal part number U109-93. |
| SPTT1519
|
Water Pump Seals | |
|
|
5/8" Modified Vulcan Type 70 with boot seat to suit ITT Gemini® models. |
| Type 136
|
Water Pump Seals | |
 |
|
Reverse-tapered spring 'O'-Ring mounted seals with pressed steel retainer and 'O'-Ring mounted face. Dimensions to specifically suit astral® flipper pumps. |
| Type 18 | Water Pump Seals | |
 |
 |
Compact, enclosed rubber bellows seal with a wide stationary seat. Very short working length makes the Type 18 ideal for equipment where space for a seal is restricted. Seal is supplied with a top hat retainer (remove upon installation) |
| Type 60 | Water Pump Seals | |
 |
 |
Sleeve mounted, rubber bellows seal, Type 65 with dimensions to equate to the common American seal standard. Mass produced and easily fitted for low pressure, general applications on small shaft diameters. |
| Type 62
|
Water Pump Seals | |
 |
|
Sleeve mounted, rubber bellows seals with shaft drive ring and 'O'-Ring mounted stationary. Designed to specificaly suit pullen® "j"-type pumps |
| Type 65 | Water Pump Seals | |
 |
 |
Sleeve mounted, rubber bellows seal, with dimensions to equate to the common American seal standard. Mass produced and easily fitted for low pressure, general applications on small shaft diameters. |
| Type 70 | Water Pump Seals | |
 |
 |
Coolant pump seal primarily utilised in combustion engine water pumps. The clearance of the seal and seat above the shaft allows one size to be used on several shaft diameters. Type 75 has dimensions to equate to the common American seal standard.Pricing shown is for materials highlighted below; |
| Type 73
|
Water Pump Seals | |
 |
 |
Single spring stationary housing mounted seals, with a variety of rotary styles, with dimensions to specificaly suit certain applications. |
| Type 74
|
Water Pump Seals | |
 |
 |
Single spring housing mounted seals, with re-inforced plastic body and tapered-boot mounted seat. Dimensions to specifically suit "Fulwood Packo®" milk equipment. |
| Type 75 | Water Pump Seals | |
 |
 |
Coolant pump seal primarily utilised in combustion engine water pumps, with dimensions to equate to the common American seal standard. |
