Welcome to Vulcan Seal Identification Suite
Direct Replacement Seals For Common O.E.M Pumps
Type 04A
|
Direct Replacement Seals For Common O.E.M Pumps | |
 |
 |
Robust short working length single spring seal with dimensions to suit Blackmer® XLW-series pumps. Design and material improvements such as constantly energized o-ring and machined metal retainer provide performance advantages. |
| Type 05
|
Direct Replacement Seals For Common O.E.M Pumps | |
|
|
Unitised multi-spring double seals with dimensions to suit ITT Flygt® pumps. Design and material improvements such as all-steel retainer parts and improved spring location provide performance advantages. |
| Type 06 (Flygt®) | Direct Replacement Seals For Common O.E.M Pumps | |
 |
|
The Vulcan range of Type 06 seals are designed as superior replacement seals for Flygt® and Grindex® submersible pumps and mixers, with no pump modifications necessary. The Type 06 designs require no additional fitting tool and most types have pre-set working lengths, operated by removable setting clips for easy installation. All Vulcan Type 06 seals are supplied fitted with Nitrile elastomers and Carbon vs T.C or SIC faces for Upper Seals as well as Viton® elastomers and T.C vs T.C or SIC vs SIC faces for Lower Seals. Vulcan also stock complete kits of sealing parts for Flygt® pumps. These repair kits include the relevant Vulcan Type 06 seals, 'O'-Rings, bearings, lip seals, cable seals and other consumable items required during pump refurbishment. The contents of each kit is dependent on pump model; the Vulcan code is constructed from the shaft size of the Upper seal, and the Flygt® pump model preceded by a "V", and the suffix ".KIT". E.g. To order Vulcan repair kit for pump model "2102-40", use Vulcan code "0220.V2102-040.KIT". |
| Type 121 | Direct Replacement Seals For Common O.E.M Pumps | |
 |
|
Vulcan produce and stock a modified 38mm Type 12 seal to suit the reduced housing size found on Sihi® pumps. Available from stock in the usual face and elastomer combinations for Type 12. |
| Type 128
|
Direct Replacement Seals For Common O.E.M Pumps | |
 |
 |
Conical spring 'O'-Ring mounted seal with bi-elastomeric 'O'-Ring seats, dimensions to specifically suit various Grundfos ® hilge® pumps. |
| Type 130
|
Direct Replacement Seals For Common O.E.M Pumps | |
 |
 |
Conical spring 'O'-Ring mounted seals with pressed steel retainer and 'O'-Ring mounted face. Dimensions to DIN L1K standards. |
| Type 131 | Direct Replacement Seals For Common O.E.M Pumps | |
 |
|
Vulcan also produce and stock Type 131 seals to suit Lowara ® CEA/A, BG/A, CO/A and HM/A pumps fitted with the new SM motor. They are modified Type 13 tapered right-hand spring seals, with Silicon or Tungsten Carbide faces vs. Silicon or Tungsten Carbide stationaries supplied with the usual choice of 'O'-Rings. |
| Type 132
|
Direct Replacement Seals For Common O.E.M Pumps | |
 |
 |
Conical spring 'O'-Ring mounted seals with pressed steel retainer and 'O'-Ring mounted face. Dimensions to specifically suit Calpeda® mpc series pumps. |
| Type 133
|
Direct Replacement Seals For Common O.E.M Pumps | |
 |
 |
Conical spring 'O'-Ring mounted seals with pressed steel retainer and 'O'-Ring mounted face. Dimensions to specifically suit Calpeda® mpc series pumps. |
| Type 134
|
Direct Replacement Seals For Common O.E.M Pumps | |
 |
 |
Conical spring 'O'-Ring mounted seals with pressed steel retainer and 'O'-Ring mounted face. Dimensions to specifically suit mono® cms series pumps. |
| Type 135
|
Direct Replacement Seals For Common O.E.M Pumps | |
 |
 |
Robust conical spring 'O'-Ring mounted seals with machined steel retainer and 'O'-Ring mounted face. Dimensions to DIN L1K standards. |
| Type 144
|
Direct Replacement Seals For Common O.E.M Pumps | |
 |
 |
Thin profile rubber bellows seal with special 'O'-Ring mounted seat with 'O'-Ring mounted in groove in pump housing. Dimensions to specifically suit kolmeks® at-series pumps. |
| Type 145
|
Direct Replacement Seals For Common O.E.M Pumps | |
 |
 |
Thin rubber bellows seal with boot mounted seat. Dimensions to specifically suit A.B.S ®. vadstena® tkb-series pumps. |
| Type 1577
|
Direct Replacement Seals For Common O.E.M Pumps | |
 |
 |
Sinusoidal-spring elastomer diaphragm seals with very short working length, dimensions to suit upper seal chamber in certain A.B.S ® AF-series submersible pumps. |
| Type 1615 | Direct Replacement Seals For Common O.E.M Pumps | |
 |
 |
The Vulcan Type 1615 is an 'O'-Ring mounted multi-spring seal to replace the upper seals found in older models of Sarlin® pumps. Available from stock with stainless steel rotary faces vs. antimony carbon seats, with Viton® 'O'-Rings. |
| Type 1620
|
Direct Replacement Seals For Common O.E.M Pumps | |
 |
 |
Robust, multiple-spring, 'O'-Ring mounted seals with set-screw drive and 'O'-Ring mounted seats, dimensions to specifically suit Haig Company® macerator pumps. |
| Type 1625
|
Direct Replacement Seals For Common O.E.M Pumps | |
 |
 |
Robust multi-spring 'O'-Ring mounted seal with set-screw drive and bi-elastomeric stationary. Design suited for many applications, especial mixers and agitators. |
| Type 1629
|
Direct Replacement Seals For Common O.E.M Pumps | |
 |
 |
Narrow profile, double ended, multiple-spring seal, designed for common American installation dimensions, in food and chemical process equipment. Utilises 'O'-Rings as secondary seal, and the Type 31 stationary seat as standard. |
| Type 1632 | Direct Replacement Seals For Common O.E.M Pumps | |
 |
 |
Vulcan produce a range or 'O'-Ring mounted wave-spring seals to replace the upper seals found in common A.B.S ® submersible pumps. Common sizes available from stock with stainless steel rotary faces with carbon seats, in the same style as the OEM seals. |
| Type 1640 | Direct Replacement Seals For Common O.E.M Pumps | |
 |
 |
Available in either repair kit form, or as a complete mechanical seal assembly, fitted within the stainless steel outer collet. The Vulcan Type 1640 is a direct replacement for the E.B.S. Seal fitted to the most common EMU Pumps. Repair kits comprise of all wear parts being; two stationaries with O-Rings, central rotary with elastomer diaphragm, anti-rotation pins and springs for stationaries and retaining pins for the collets. |
| Type 1651
|
Direct Replacement Seals For Common O.E.M Pumps | |
 |
 |
Repair kits comprising monolithic carbon rotary face with 'O'-Ring, stainless steel static face with elastomer boot and wave spring. Dimensions to suit I.T.T. Jabsco® Hy-Line series pumps. |
| Type 1654
|
Direct Replacement Seals For Common O.E.M Pumps | |
|
 |
Repair kits comprising monolithic carbon rotary face with 'O'-Ring, stainless steel static face with elastomer boot and wave spring. Dimensions to suit I.T.T. Jabsco® Hy-Line series pumps. |
| Type 1657
|
Direct Replacement Seals For Common O.E.M Pumps | |
 |
 |
Robust, multiple-spring, 'O'-Ring mounted seals with short working length and set-screw drive. Supplied with gasket-mounted clamped seats as standard. |
| Type 1661
|
Direct Replacement Seals For Common O.E.M Pumps | |
 |
 |
Robust, balanced, hygienic seals with the multiple springs protected from the media, and clamped drive from the shaft. Dimensions to specifically suit GEA Tuchenhagen® KN-series pumps. |
| Type 1661F
|
Direct Replacement Seals For Common O.E.M Pumps | |
 |
|
Robust, balanced, hygienic seals with the multiple springs protected from the media, and clamped drive from the shaft. Dimensions to specifically suit Fristam® FPE 1230 pumps. |
| Type 1662
|
Direct Replacement Seals For Common O.E.M Pumps | |
 |
 |
Robust, balanced, hygienic seals with the multiple springs protected from the media, and clamped drive from the shaft. Dimensions to specifically suit Grudfos Hilge® pumps. |
| Type 1663
|
Direct Replacement Seals For Common O.E.M Pumps | |
 |
 |
Robust, balanced, hygienic seals with the multiple springs protected from the media, and clamped drive from the shaft. Dimensions to specifically suit Grudfos Hilge® pumps. |
| Type 1663A
|
Direct Replacement Seals For Common O.E.M Pumps | |
 |
|
Robust, balanced, hygienic seals with the multiple springs protected from the media, and clamped drive from the shaft. Dimensions to specifically suit Grudfos Hilge® pumps. |
| Type 1676
|
Direct Replacement Seals For Common O.E.M Pumps | |
 |
 |
Robust, balanced, hygienic seals with the multiple springs protected from the media, and clamped drive from the shaft. Dimensions to specifically suit Fristam ® FM-series multi-stage pumps. |
| Type 1680
|
Direct Replacement Seals For Common O.E.M Pumps | |
 |
 |
Wave-spring, step-balanced, barrel-less seals with distinctive flat-sided 'O'-Ring mounted carbon seats. Dimensions to suit Alfa Laval® SR and LKPL pump ranges. |
| Type 1681
|
Direct Replacement Seals For Common O.E.M Pumps | |
 |
 |
Wave-spring, 'O'-Ring mounted stationary seals, with inserted tungsten carbide un-sprung rotary face, and inserted carbon stationary face. Dimensions to suit Warman® high-pressure rotary pumps. |
| Type 1688A
|
Direct Replacement Seals For Common O.E.M Pumps | |
 |
 |
Wave spring mechanical seal with thin cross section and short working length. Most commonly used on rotary lobe pumps, found extensively in the food, process, dairy and brewery industries. Popular, common sizes are fitted with Vulcan’s Sinusoidal Split Wave-Springs. |
| Type 1688W | Direct Replacement Seals For Common O.E.M Pumps | |
 |
 |
Vulcan manufacture seals to suit SR Series Pumps from S.S.P.® Vulcan Type 1688W seal and seat assemblies are designed to fit the most popular rotary lobe pumps, without any modification. The monolithic Tungsten Carbide or Stainless Steel seal head avoids face spinning problems, associated with competitor designs in common lobe pump duties. |
| Type 1688Y | Direct Replacement Seals For Common O.E.M Pumps | |
 |
 |
Vulcan seals to suit Johnson® Positive Displacement Pumps Vulcan Type 1688Y seal and seat suit Johnson® positive displacement pumps, in all standard shaft sizes. Again the monolithic seal head provides seal capability, performance and increased life benefits. |
| Type 1688Z
|
Direct Replacement Seals For Common O.E.M Pumps | |
 |
 |
Wave-spring 'O'-Ring mounted mechanical seal with set-screw drive and short working length and bi-elastomer stationaries. Dimensions to suit Johnson® TL series pumps. |
| Type 1689 | Direct Replacement Seals For Common O.E.M Pumps | |
 |
 |
Vulcan have designed a special Type 1689 seal to suit the ACE025, ACE032 and ACE038 generation three pumps fitted with the three-part seals. |
| Type 1690 | Direct Replacement Seals For Common O.E.M Pumps | |
 |
|
Vulcan have designed a special Type 1690 seal to suit the ACE025, ACE032 and ACE038 generation three pumps fitted with the three-part seals. |
| Type 1691
|
Direct Replacement Seals For Common O.E.M Pumps | |
|
|
Wave-spring 'O'-Ring mounted mechanical seal without barrel, to locate directly onto the shaft step and provide exceptional short working length. Dimensions to suit GEA Tuchenhagen® KN series pumps. |
| Type 1692
|
Direct Replacement Seals For Common O.E.M Pumps | |
|
|
Wave-spring 'O'-Ring mounted mechanical seal with set-screw drive and multiple retainer spacers to provide exceptionally long working length. Dimensions to suit Blentech® rotary cookers. |
| Type 1724P
|
Direct Replacement Seals For Common O.E.M Pumps | |
 |
|
High performance rubber bellows seal with protected non-clogging spring, and special dimension seat ring with 'O'-Ring to mount into housing groove. Dimensions to suit Godwin®HL-series pumps. |
| Type 180
|
Direct Replacement Seals For Common O.E.M Pumps | |
 |
 |
Parallel spring 'O'-Ring mounted seals with steel rotary head and set-screw drive base. Dimensions to specifically suit varley® vacuum pumps. |
| Type 191 | Direct Replacement Seals For Common O.E.M Pumps | |
 |
 |
Vulcan manufactures and stocks two sizes of Type 191 elastomer bellows seals to suit common Wilo® heating pumps. Available from stock in carbon vs. Silicon carbide with E.P. elastomers. Seals are also available with brass shaft sleeves. Other shaft sizes such as 14mm, 17mm and 22mm are available, please enquire for details. |
| Type 192G | Direct Replacement Seals For Common O.E.M Pumps | |
 |
 |
Vulcan manufacture and stock an elastomer bellows seal that is designed to replace the Grundfos ® seal styles "A-", "B-" & "C-" with a single superior performing and easier to install seal design. Available from stock in carbon vs. Tungsten carbide, or tungsten carbide vs. Tungsten carbide, in E.P. or Viton ® elastomers. |
| Type 192K | Direct Replacement Seals For Common O.E.M Pumps | |
 |
 |
Vulcan produce and stock a range of elastomer bellows seals to suit the most common types of standard KSB® pumps. Available from stock with carbon or silicon carbide rotary faces with silicon carbide seats, in the three standard elastomers. |
| Type 194 | Direct Replacement Seals For Common O.E.M Pumps | |
 |
 |
The Vulcan Type 194 is a robust elastomer bellows seal to replace the "G-" seals found in Hidrostal pumps. Available with silicon carbide rotary faces and silicon carbide boot seats. Size codes marked with "*" are supplied complete with the necessary back washer to separate the bellows from shaft circlip. |
| Type 195 | Direct Replacement Seals For Common O.E.M Pumps | |
 |
 |
Vulcan produce a range of elastomer bellows seals to replace the bellows lower seals found in common A.B.S ® submersible pumps. Available from stock in silicon carbide rotary faces with silicon carbide seats, in the same style as the OEM seals. Unless stated, all sizes are supplied complete with the necessary back washer to separate the bellows from shaft circlip. |
| Type 195P
|
Direct Replacement Seals For Common O.E.M Pumps | |
 |
 |
Robust rubber bellows seal with large diameter 'O'-Ring mounted seat ans star clip, dimensions to specifically suit A.B.S ® jumbo and pumpex® sp series submersible pumps. |
| Type 196 32MM & 38MM
|
Direct Replacement Seals For Common O.E.M Pumps | |
 |
 |
Robust rubber bellows seals with extended working lengths and boot-mounted seats, dimensions to specifically suit S.S.P.® and sterling® pumps. |
| Type 196 up to 25mm
|
Direct Replacement Seals For Common O.E.M Pumps | |
 |
 |
Robust rubber bellows seals with extended working lengths, spacers and 'O'-Ring mounted seats, dimensions to specifically suit Grundfos ®® cp-series pumps. |
| Type 197 | Direct Replacement Seals For Common O.E.M Pumps | |
 |
 |
Vulcan produce a range of elastomer bellows seals to replace the "SU" range of KSB® seals. Available to order with carbon or silicon carbide rotary faces with silicon carbide seats, in the three standard elastomers. |
| Type 198 40MM AND UP
|
Direct Replacement Seals For Common O.E.M Pumps | |
 |
|
Robust rubber bellows seals with extended working lengths and bezel-front 'O'-Ring mounted seats, dimensions to specifically suit Andritz® s-series waste water pumps. |
| Type 198 up to 28mm
|
Direct Replacement Seals For Common O.E.M Pumps | |
 |
|
Robust rubber bellows seals with extended working lengths, spacers and 'O'-Ring mounted seats, dimensions to specifically suit Ebara® evm-series pumps. |
| Type 207
|
Direct Replacement Seals For Common O.E.M Pumps | |
 |
 |
Resilient elastomer diaphragm seal with modified base plate, and monolithic carbide seat, dimensions to directly suit Gorman-Rupp® T-series waste water pumps.. |
| Type 216
|
Direct Replacement Seals For Common O.E.M Pumps | |
 |
 |
Balanced rubber diaphragm seal with parallel single spring and boot mounted seat. Dimensions to specifcally suit K.S.B ® Ajax-series pumps. |
| Type 260A
|
Direct Replacement Seals For Common O.E.M Pumps | |
 |
 |
Double-ended rubber diaphragm seal with single spring and boot mounted seats as standard. Dimensions to suit various Japanese pumps including Ebara® and Tsurumi®. |
| Type 260B
|
Direct Replacement Seals For Common O.E.M Pumps | |
 |
 |
Double-ended rubber diaphragm seal with single spring and boot mounted seats as standard. Dimensions to suit various Japanese pumps including Ebara® and Tsurumi®. |
| Type 272
|
Direct Replacement Seals For Common O.E.M Pumps | |
 |
 |
Single spring L-gasket seal with pin-driven carbon rotary face , and end-plate type stainless steel seat with PTFE gasket, to directly suit A.P.V®. Pasilac® 51-series milk pumps. |
| Type 277 | Direct Replacement Seals For Common O.E.M Pumps | |
|
 |
Vulcan manufacture and stock the type 277 and 278 diaphragm bellows seal ranges to suit the unique dimensions required in the "CG-series" range of pumps. The Type 277 has reverse-tapered coils, while the Type 278 has distinctive lengthened parallel coils. |
| Type 278 | Direct Replacement Seals For Common O.E.M Pumps | |
 |
 |
Vulcan manufacture and stock the type 277 and 278 diaphragm bellows seal ranges to suit the unique dimensions required in the "CG-series" range of pumps. The Type 277 has reverse-tapered coils, while the Type 278 has distinctive lengthened parallel coils. |
| Type 279
|
Direct Replacement Seals For Common O.E.M Pumps | |
 |
 |
Reverse-tapered spring elastomer diaphragm rotary units with very short working length to suit dimensions required by aircraft refueling pumps. |
| Type 28 | Direct Replacement Seals For Common O.E.M Pumps | |
 |
 |
Vulcan also offer a complete 53mm shaft to suit Imperial Machine Company® waste-disposal units, model numbers 1204 and 1604. Seals have stainless steel rotary faces vs. Carbon seats, with Viton® elastomers. |
| Type 281 | Direct Replacement Seals For Common O.E.M Pumps | |
 |
|
Vulcan also offer a complete 53mm shaft seal to suit Imperial Machine Company® waste-disposal units, model numbers 1204 and 1604. Seals have stainless steel rotary faces vs. Carbon seats, with Viton® elastomers. |
| Type 283
|
Direct Replacement Seals For Common O.E.M Pumps | |
 |
|
Rubber-encased, carbon faced stationary seals with L-gasket mounted steel rotary rings. Especially suited to high-speed light duty applications where a very short operating length is required, such as industrial washing machines. |
| Type 297
|
Direct Replacement Seals For Common O.E.M Pumps | |
 |
 |
Repair kits comprising monolithic rotary and stationary faces with necessary o-rings, to suit A.P.V® dw-series pumps. |
| Type 40 Imperial | Direct Replacement Seals For Common O.E.M Pumps | |
 |
 |
Vulcan's Type 40 is a multiple-spring, 'O'-Ring mounted, set-screw driven, non-clogging, balanced mechanical seal. The balanced design, protected springs and dynamic 'O'-Ring enable use in demanding applications. Available with a wide variety of seats, Types 40H (UK) & 40J (USA housing dimensions) are illustrated here. |
| Type 40 Metric | Direct Replacement Seals For Common O.E.M Pumps | |
|
|
Vulcan's Type 40 is a multiple-spring, 'O'-Ring mounted, set-screw driven, non-clogging, balanced mechanical seal. The balanced design, protected springs and dynamic 'O'-Ring enable use in demanding applications. Available with a wide variety of seats, Types 40H (UK) & 40J (USA housing dimensions) are illustrated here. |
| Type 40S | Direct Replacement Seals For Common O.E.M Pumps | |
 |
 |
The Vulcan Types 40S and 42 are 'O'-Ring mounted, hydraulically-balanced multi-spring seals to replace the upper and lower seals found in more recent designs of Sarlin pumps. |
| Type 41 | Direct Replacement Seals For Common O.E.M Pumps | |
 |
 |
The Vulcan Type 41 is a unitised, highly robust, balanced multispring design seal, to provide an alternative lower seal. With the springs protected from the media, to prevent seal damage and clogging, that often leads to premature seal failure. |
| Type 42 | Direct Replacement Seals For Common O.E.M Pumps | |
 |
 |
The Vulcan Types 40S and 42 are 'O'-Ring mounted, hydraulically-balanced multi-spring seals to replace the upper and lower seals found in more recent designs of Sarlin pumps. |
| Type 43
|
Direct Replacement Seals For Common O.E.M Pumps | |
|
 |
Multiple-spring, non-clogging, balanced mechanical seal with key drive from shaft. Designed to replace metal bellows "680" type seals in grasso® reciprocating compressors. |
| Type 44 rotary
|
Direct Replacement Seals For Common O.E.M Pumps | |
 |
 |
In balanced seals pack |
| Type 81 | Direct Replacement Seals For Common O.E.M Pumps | |
 |
 |
The Vulcan Type 81 is an 'O'-Ring mounted tapered-spring seal to replace the lower seals with the distinctive design seats. Available from stock with silicon carbide rotary faces vs. Silicon carbide seats, with Viton® 'O'-Rings. |
| Type 810
|
Direct Replacement Seals For Common O.E.M Pumps | |
|
|
Conical spring 'O'-Ring mounted seal with inserted head and 'O'-Ring mounted seats, dimensions to specifically suit A.B.S ® jumbo (formely pumpex k-series) submersible pumps |
| Type 811
|
Direct Replacement Seals For Common O.E.M Pumps | |
|
|
Conical spring 'O'-Ring mounted seal with monolithic head and 'O'-Ring mounted seat, dimensions to specifically suit Kral® hot oil transfer screw pumps |
| Type 820
|
Direct Replacement Seals For Common O.E.M Pumps | |
 |
 |
Single spring 'O'-Ring mounted seal with protective coil sheath and monolithic seal driven by 'O'-Ring recessed in shaft. Specifically to suit A.B.S ®. Pumpex® sp series pumps. |
| Type 821
|
Direct Replacement Seals For Common O.E.M Pumps | |
 |
|
Conical spring 'O'-Ring mounted balanced seal for stepped shafts, dimensions to specifically suit K.S.B ® movi series pumps. |
| Type 84
|
Direct Replacement Seals For Common O.E.M Pumps | |
|
 |
'O'-Ring mounted wave-spring seal head with key drive and 'o'ring seat, to dimensions to specificaly suit Waukesha® votator equipment. |
| Type 86 | Direct Replacement Seals For Common O.E.M Pumps | |
 |
 |
The Vulcan Type 86 is an 'O'-Ring mounted seal face kit to suit Sarlin® pumps fitted with single seals with three-faces. Available from stock with silicon carbide inboard seat, carbon outboard seat, and silicon carbide central rotary faces, with Viton® 'O'-Rings. |
| Type 89 | Direct Replacement Seals For Common O.E.M Pumps | |
 |
 |
Vulcan produce and stock a range of seals to suit several Viking® pumps, including the Positive Displacement and Rotary Lobe pumps. The Vulcan Type 89 is a specific design to replace the original seals found in the popular Viking® 4225 pump range, and has the double-pinned seat required for the housings on this pump type. Seals are available from stock with inserted silicon carbide faces on both the rotary and stationary. Fitted with Viton® O-Rings. Other O-Rings and face materials are available, if specified at time of order. |
| Type 8BU
|
Direct Replacement Seals For Common O.E.M Pumps | |
 |
 |
Conical spring, 'O'-Ring mounted seal with solid 316 stainless steel seal head and 'O'-Ring mounted carbon seat with modified dimensions to suit Grundfos ® Hilge® pumps. |
| Type 8W | Direct Replacement Seals For Common O.E.M Pumps | |
 |
 |
Vulcan produce and stock seals to suit the Allweiler SPF10 and SPF20 pumps. Seals have tapered right-hand springs with inserted carbon or tungsten carbide faces vs. Inserted silicon or tungsten carbide stationaries. Viton 'O'-Rings are supplied as standard, if you require another elastomer please specify at time of order. |
| Type 8X | Direct Replacement Seals For Common O.E.M Pumps | |
|
|
Vulcan manufacture a complete range of standard and special Type95 and Type 97 seals to suit Hamworthy® pumps; please contact us with the pump or seal part number. Vulcan also produce a special seal to suit the Hamworthy® JOB 22 pump. Seals have tapered right-hand springs, with inserted carbon faces vs. Monolithic silicon carbide, gasket mounted, seat. Viton® 'O'-Rings and P.T.F.E. gasket are supplied as standard, if you require another elastomer please specify at time of order. |
| Type 8Y | Direct Replacement Seals For Common O.E.M Pumps | |
 |
 |
Vulcan produce and stock seals to suit Anema® pumps. Available in 30mm and 35mm sizes, seals have tapered right-hand springs with inserted carbon faces vs. Monolithic stainless steel plate seats. Nitrile 'O'-Rings are supplied as standard, if you require another elastomer please specify at time of order. |
| Type 90F
|
Direct Replacement Seals For Common O.E.M Pumps | |
|
 |
Conical spring 'O'-Ring mounted seal with monolithic head and boot mounted seat, dimensions to specifically suit Fulwood Packo® milk equipment |
| Type 912
|
Direct Replacement Seals For Common O.E.M Pumps | |
 |
 |
Repair kits comprising monolithic rotary and stationary faces, set of coils, o-rings, and ptfe washer, to suit Alfa Laval® lkh 110 series multi-stage pumps |
| Type 92B
|
Direct Replacement Seals For Common O.E.M Pumps | |
 |
|
Type 92b 32mm complete 'O'-Ring mounted seals, with stainless steel drive base to coil, dimensions to suit Alfa Laval® lkh series pumps fitted with flush housing. |
| Type 94 | Direct Replacement Seals For Common O.E.M Pumps | |
 |
 |
Vulcan produce and stock a complete range of balanced seals to suit the Tuchenhagen® A and Z series pumos, seal types F1 to F5. Available with inserted carbon face seal heads, and inserted silicon carbide, or chrome dioxide coated stainless steel rotary counterfaces. E.P. 'O'-Rings are fitted as standard. If Nitrile or Viton® is required, please specify this at time of order. |
| Type 953
|
Direct Replacement Seals For Common O.E.M Pumps | |
 |
|
Single-spring 'O'-Ring mounted semi-cartridge seals with threaded hex-heads to suit Grundfos ® CR & CRI series centrifugal pumps. The Vulcan Type 953 features inserted carbide faces driven by 'O'-Rings, removing the posibility of face cracking during pump start-up, and improving the life expectancy of these seals. |
| Type 954
|
Direct Replacement Seals For Common O.E.M Pumps | |
 |
|
22mm Single-spring 'O'-Ring mounted semi-cartridge seals with push-fit heads to suit Grundfos ® CR & CRI series centrifugal pumps. The Vulcan Type 954 features inserted carbide faces driven by 'O'-Rings, removing the posibility of face cracking during pump start-up, and improving the life expectancy of these seals. |
| Type 96D
|
Direct Replacement Seals For Common O.E.M Pumps | |
 |
 |
Parallel spring 'O'-Ring mounted seals with drive provided from extended drive base in tail of coil. Dimensions to specifically suit Halls ® V-Series reciprocating compressors. |
| Type B94 | Direct Replacement Seals For Common O.E.M Pumps | |
 |
|
Modified Vulcan type 94 seals with turning vanes cut into the OD of the Rotary faces to agitate pumping media. Standard materials are solid steel rotary rings with inserted carbon faced sprung statics. E.P. 'O'-Rings are fitted as standard. If Nitrile or Viton® is required, please specify this at time of order. All sizes are supplied complete with both running faces and stationary coil. |
| Type W9
|
Direct Replacement Seals For Common O.E.M Pumps | |
|
 |
Conical spring 'O'-Ring mounted seal with monolithic head and boot mounted seat, dimensions to specifically suit Fulwood Packo® milk equipment |
